CHN-TOP SCI&TECH CO., LTD.
CHN-TOP SCI&TECH CO.,LTD. Comprehensive solutions for PCD PCBN diamond tools' making
Add to Cart
47mm PCD Blank For nonferrous metal Cutting High Wear Resistance
Description:
PCD cutting tool blanks are produced by sintering selected diamond particles at high pressure and high temperature, and consist of diamond layer and tungsten carbide substrate.
Quick Details:
1. Sharp cutting and high impact and surface finish.
2. Good balance of toughness and wear resistance is required.
3. Longer tool life, high abrasion resistance.
4. Highly improved work piece quality and excellent dimensional control.
5. Enhancement of composite properties.
| Specifications | |
| Name | Polycrystalline Diamond |
| Brand | CT-S&T |
| Country | China |
| Usage | PCD inserts cutting tools |
| Application | Metal,Nonmetal,Wood |
| Thickness | 1.6/2.0/3.2 |
| Availability | In stock |
| Transportation | DHL, UPS, TNT, FEDEX |
| Grit | 3-28um |
M-Series
| Grade | Grit Sizeμm | Thickness mm | Diameter mm | Wear resistance | Impact | Conductivity |
| ZT005 | 5 | 1.6/2.0/3.2 | 47.0/54.0 | Low | High | High |
| ZT10M | 10 | 1.6/2.0/3.2 | 47.0/54.0 | Middle | Middle | Middle |
| ZT025M | 25 | 1.6/2.0/3.2 | 47.0/54.0 | High | Middle | Low |
| ZT302M | 30/2 | 1.6/2.0/3.2 | 47.0/54.0 | High | Middle | Low |
W-series
| Grade | Grit Sizeμm | Thickness mm | Diameter mm | Wear resistance | Impact | Conductivity |
| ZT10W | 10 | 1.6/2.0/3.2 | 47.0/54.0 | Middle | Middle | Middle |
| ZT025W | 28 | 1.6/2.0/3.2 | 47.0/54.0 | High | Middle | Low |
| ZT302W | 30/2 | 1.6/2.0/3.2 | 47.0/54.0 | High | Middle | Low |
Application:
PCD cutting tool blanks are widely used for the machining of non-ferrous metals and alloys, such as aluminum, copper, aluminum / gray iron composites, as well as nonmetallic materials such as wood, chipboard, ceramics, plastic, rubber etc, where high abrasion resistance and good surface finish are required. The products are available in 5um, 10 um and 25um.
